Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 15472 | 3M PURIFICATION INC. |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APGF | DESIGN TYPE | NONREUSABLE |
| APGF | DESIGN TYPE | NONREUSABLE |
| ADNH | FILTRATION RATING IN MICRONS | 25.0 NOMINAL |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| ADNP | DROP PRESSURE | NOT RATED |
| ADAS | BODY INSIDE DIAMETER | 1.611 INCHES MINIMUM AND 1.619 INCHES MAXIMUM |
| ADNQ | DIFFERENTIAL PRESSURE | 150.0 POUNDS PER SQUARE INCH |
| AZTL | BODY OVERALL LENGTH | 5.781 INCHES MINIMUM AND 5.844 INCHES MAXIMUM |
| AZKQ | TEMP RATING | 40.0 DEG FAHRENHEIT MINIMUM AND 220.0 DEG FAHRENHEIT MAXIMUM |
| ADNL | FILTERING SURFACE AREA | ANY ACCEPTABLE |
| CRXW | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |
| ABPM | BODY DIAMETER | 2.188 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CONTAINER/CARTRIDGE |
| MATT | MATERIAL | PAPER FILTERING MEDIUM |
| MEDA | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE |