Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
Code | Company |
---|---|
55566 | R A F ELECTRONIC HARDWARE INC |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
AASK | HEAD STYLE | KNURLED NO. 1 |
MATT | MATERIAL | STEEL COMP 303 OVERALL |
AASA | THREAD LENGTH | 0.312 INCHES MINIMUM |
AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.281 INCHES NOMINAL |
CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASL | HEAD DIAMETER | 0.312 INCHES NOMINAL |
AASU | HEAD HEIGHT | 0.312 INCHES NOMINAL |
THSD | THREAD SERIES DESIGNATOR | UNC |
AAJD | THREAD CLASS | 2A |
AASB | FASTENER LENGTH | 0.625 INCHES NOMINAL |
AAWC | FIRST DIAMETER FROM HEAD | 0.095 INCHES NOMINAL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
FEAT | SPECIAL FEATURES | POINT ON END 0.093 INCHES LONG 90.0 DEGREES OF ANGLE 0.095 INCH DIAMETER |
CMLP | THREAD QUANTITY PER INCH | 32 |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |