Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT ASSEMBLY , FLEXIBLE
Definition:
AN ITEM CONSISTING OF A CASING WITH FITTINGS AND ATTACHMENTS ON EACH END AND A SPIRALLY WOUND WIRE CORE WITH FORMED END(S) AND/OR CRIMPED ON END FITTINGS. IT IS DESIGNED TO TRANSMIT ROTARY MOTION AROUND BENDS FROM A MOTOR OR OTHER POWER SOURCE TO DRIVE VARIOUS TYPES OF EQUIPMENT, SUCH AS TACHOMETERS, SPEEDOMETERS, REMOTE CONTROLS, INSTRUMENTS, AND THE LIKE, WHICH ARE LOCATED AT AN ANGLE AND/OR DISTANCE FROM THE POWER SOURCE. SEE ALSO CONTROL ASSEMBLY, PUSH-PULL.
CAGE Information
| Code | Company |
|---|---|
| 97945 | PENNWALT CORP S S WHITE INDUSTRIAL P |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AXYS | SPLINE TYPE | INVOLUTE BOTH ENDS |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| AKMH | CORE DIAMETER | 0.187 INCHES NOMINAL |
| BPPL | WRENCHING FACILITY TYPE | KNURLED SURFACE BOTH ENDS |
| ABUJ | THREAD SIZE (NON-CORE) | ERR-070 |
| APJC | THREAD LOCATION | INTERNAL FIRST END |
| ADMS | WRENCHING FACILITY OUTSIDE DIAMETER | 0.750 INCHES NOMINAL BOTH ENDS |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL FIRST END |
| ABSA | SPLINE QUANTITY | 12 BOTH ENDS |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.406 INCHES NOMINAL FIRST END |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF SECOND END |
| BJPS | CASING MATERIAL | STEEL |
| AHHF | TONGUE THICKNESS | 0.000 INCHES MINIMUM BOTH ENDS AND 20.156 INCHES MAXIMUM BOTH ENDS |
| AGJS | PITCH DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS |
| CFRN | CASING SURFACE TREATMENT | ZINC COATED AND PAINT, BLACK |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.438 INCHES NOMINAL SECOND END |
| CFSM | STRENGTH RATING CHARACTERISTICS (NON-CORE) | 68.0 POUNDS TORSION STRENGTH WINDING DIRECTION |
| AEDN | TIP LENGTH | 0.438 INCHES MINIMUM BOTH ENDS AND 0.469 INCHES MAXIMUM BOTH ENDS |
| AJXJ | CORE MATERIAL | STEEL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.297 INCHES NOMINAL BOTH ENDS |
| CFRQ | CASING OUTSIDE DIAMETER | 0.273 INCHES NOMINAL |
| ABSC | SPLINE MINOR DIAMETER | 0.207 INCHES NOMINAL BOTH ENDS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END |
| AASA | THREAD LENGTH | 0.500 INCHES MINIMUM BOTH ENDS AND 0.750 INCHES MAXIMUM BOTH ENDS |
| CFRM | TORSIONAL DEFLECTION RATING | 2.0 DEGREES FT-LB IN. WINDING AND 4.0 DEGREES FT-LB IN. UNWINDING |
| AWZY | END CONNECTION TYPE | THREADED EXTERNAL SECOND END |
| ZZZV | FSC APPLICATION DATA | SIGHTS,OPTICAL,AIRCRAFT GUNNERY FIRE CONTROL COMPONENT |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER |
| AAJD | THREAD CLASS | 3A SECOND END |
| CFRZ | CORE OVERALL LENGTH | 33.969 INCHES NOMINAL |
| AGPX | SHOULDER OUTSIDE DIAMETER | 0.750 INCHES NOMINAL BOTH ENDS |
| AAJD | THREAD CLASS | 2A FIRST END |
| AXFH | SPLINE LENGTH | 0.250 INCHES NOMINAL BOTH ENDS |
| CGDN | MINIMUM OPERATING RADIUS | 3.500 INCHES |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.500 BOTH ENDS |
| APJC | THREAD LOCATION | EXTERNAL SECOND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| ABHP | OVERALL LENGTH | 33.969 INCHES NOMINAL |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.187 INCHES FILTER HOUSING LEFT SIDE ANY ACCEPTABLE BOTH ENDS AND 0.250 INCHES ONE WASHER SWAGED TO SLEEVE ANY ACCEPTABLE BOTH ENDS |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| APTD | END TYPE | SQUARE MALE SECOND END |
| CFRP | CASING LENGTH BETWEEN FERRULES | 33.000 INCHES NOMINAL |
| CFRW | END OVERALL DIAMETER | 0.438 INCHES MINIMUM BOTH ENDS AND 1.000 INCHES MAXIMUM BOTH ENDS |
| APTD | END TYPE | ROUND, INTERNAL SPLINED FIRST END |