Part Number
Part Number:
NSN:
NIIN:
Item Name:
RESOLVER , ELECTRICAL
Definition:
AN ITEM CONSISTING OF A ROTOR AND A STATOR INDUCTIVELY COUPLED. IT USUALLY HAS TWO ROTOR WINDINGS DISPLACED FROM EACH OTHER BY 90 DEGREES AND TWO STATOR WINDINGS SIMILARLY DISPLACED. THE OUTPUT VOLTAGE(S) IS A TRIGONOMETRIC FUNCTION OF THE INPUT VOLTAGE(S) AND THE ANGULAR DISPLACEMENT OF THE ROTOR WITH RESPECT TO THE STATOR. SEE ALSO SYNCHRO (AS MODIFIED) AND GONIOMETER, ELECTRICAL. EXCLUDES TRANSOLVER, ELECTRICAL AND POTENTIOMETER SINE/COSINE ELECTRICAL RESOLVERS.
CAGE Information
| Code | Company |
|---|---|
| 12909 | CARDION INC |
Federal Supply Class
Title
SYNCHROS AND RESOLVERS
Inclusions:
Exclusions:
EXCLUDES SYNCHRO SYSTEMS; SERVO MECHANISMS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | 32.00 NOMINAL |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | 32.00 NOMINAL |
| CSJY | TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOT RATED |
| AJSL | BODY SIZE | 15 |
| ABXF | SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 30.0 MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1870 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 175 SINGLE SHAFT |
| AAVH | SHOULDER DIAMETER | 1.3120 INCHES MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABWV | SHAFT DIAMETER | 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | NOT RATED |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.185 INCHES SINGLE SHAFT |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 20.00 OUTPUT |
| AJWP | TERMINAL DESIGNATOR AND SCHEMATIC POSITION | CONNECTION R3 POSITION D AND CONNECTION R4 POSITION G AND CONNECTION S1 POSITION A AND CONNECTION R2 POSITION J AND CONNECTION C1 POSITION K AND CONNECTION R1 POSITION C AND CONNECTION S3 POSITION B AND CONNECTION C2 POSITION L |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 SCREW |
| AAQL | BODY STYLE | STANDARD ROUND B |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | ERR-090 |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 200.00 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 1000.0 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 16.00 NOMINAL |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 4.200 INPUT TO OUTPUT NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 12.00 NOMINAL |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 700.0 MILLIWATTS MAXIMUM |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0/+5.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 0.8500 INCHES MAXIMUM |
| PKWT | UNPACKAGED UNIT WEIGHT | 6.500 OUNCES |
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| AJWH | SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| AJSP | STATOR INPUT CURRENT RATING | 135.0 MILLIAMPERES MAXIMUM |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES MINIMUM SINGLE SHAFT |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.0510 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| ABHP | OVERALL LENGTH | 2.7110 INCHES MAXIMUM |
| AJST | ROTOR INPUT CURRENT RATING | NOT RATED |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 81.00 NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0/+7.0 |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| ABKK | FLANGE DIAMETER | 1.4370 INCHES MAXIMUM |