Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
Code | Company |
---|---|
96214 | RAYTHEON COMPANY |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39015/2 GOVERNMENT SPECIFICATION |
ABTB | MOUNTING HOLE DIAMETER | 0.073 INCHES NOMINAL |
AAPN | SECTION QUANTITY | 1 |
ABMK | OVERALL WIDTH | 0.205 INCHES NOMINAL |
ABKW | OVERALL HEIGHT | 0.500 INCHES NOMINAL |
CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7200.0 MINIMUM AND 15120.0 MAXIMUM |
TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
CBME | CUBIC MEASURE | 0.053 CUBIC INCHES |
AARG | RELIABILITY INDICATOR | ESTABLISHED |
AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL |
ADAQ | BODY LENGTH | 0.515 INCHES NOMINAL |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION |
TEST | TEST DATA DOCUMENT | 81349-MIL-R-39015 SPECIFICATION |
CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION |
ABXF | SHAFT LENGTH | 0.045 INCHES MAXIMUM |
CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM |
AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
ADAT | BODY WIDTH | 0.205 INCHES NOMINAL |
AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 |
CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
AKPV | MOUNTING FACILITY QUANTITY | 2 |
APXH | TERMINAL LOCATION | REAR END |
CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7200.0 MINIMUM AND 15120.0 MAXIMUM |
AEFD | ACTUATOR TYPE | SINGLE SHAFT |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
AXGY | MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE |
ABWV | SHAFT DIAMETER | 0.078 INCHES NOMINAL |
AEDX | SHAFT STYLE | ROUND, SLOTTED |
CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |