Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 04729 | UNICORP |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASK | HEAD STYLE | KNURLED NO. 2 |
| AASU | HEAD HEIGHT | 0.161 INCHES MINIMUM AND 0.213 INCHES MAXIMUM |
| ABQJ | POINT STYLE | CONE |
| AAUY | POINT LENGTH | 0.125 INCHES NOMINAL |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| CWDK | POINT CHAMFER ANGLE | 55.0 DEGREES MINIMUM AND 65.0 DEGREES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | W/O INTERNAL DRIVE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.173 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 420F OVERALL OR STEEL COMP 430F OVERALL OR STEEL COMP 416SE OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 303PB OVERALL OR STEEL COMP 203EZ OVERALL OR STEEL COMP 416 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 303 PLUS X OVERALL OR STEEL COMP 303MA OVERALL OR STEEL COMP 430FSE OVERALL OR STEEL COMP 420FSE OVERALL OR STEEL COMP 416 PLUS X OVERALL OR STEEL COMP 440F OVERALL |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.489 INCHES MINIMUM AND 0.509 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 2A |
| AASB | FASTENER LENGTH | 0.797 INCHES MINIMUM AND 0.827 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.307 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| AAVA | POINT DIAMETER | 0.079 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAWC | FIRST DIAMETER FROM HEAD | 0.090 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |