Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 81833 | TRANSDIGM INC DBA AEROCONTROLEX |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BDSR | SECOND END SPLINE QUANTITY | 11 |
| ATPC | STEP QUANTITY | 6 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.2050 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.660 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 0.312 INCHES NOMINAL |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) |
| MATT | MATERIAL | COPPER ALLOY |
| AMDL | FIRST END DIAMETER | 0.2670 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.2670 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| BDSQ | FIRST END SPLINE QUANTITY | 10 |
| AAHW | SECOND END GROOVE WIDTH | 0.0312 INCHES NOMINAL |
| AAHX | SECOND END GROOVE DIAMETER | 0.1750 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.438 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.2460 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.410 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.2050 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 0.500 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.2460 INCHES NOMINAL |