National Stock Number (NSN) Output Data
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 10234315 (JOB NR418) | 28337 | F | 3 | 9 | 6 | AX | ||
| 10234315 | 18876 | A | 7 | 2 | A | AX | ||
| FC142-40 | 00481 | H | 5 | 9 | 6 | BD | ||
| 10234315 | 28337 | F | 5 | 9 | 5 | TX |
CAGE Information
| Code | Company |
|---|---|
| 00481 | ASCO SINTERING CO |
| 28337 | NEWMET KREBSOGE INC |
| 18876 | U S ARMY AVIATION AND MISSILE COMMAN |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AZTL | BODY OVERALL LENGTH | 0.195 INCHES NOMINAL |
| APGF | DESIGN TYPE | NONREUSABLE |
| AAZL | TAPERED HOLE MINOR DIAMETER | 0.125 INCHES NOMINAL |
| AGWM | LARGEST OUTSIDE DIAMETER | 0.298 INCHES NOMINAL |
| CRXW | FILTERING MEDIA DESIGN | SINTERED SINGLE FILTERING MEDIA RESPONSE |
| CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| ADNH | FILTRATION RATING IN MICRONS | 50.0 ABSOLUTE AND 25.0 NOMINAL |
| AGWL | SMALLEST OUTSIDE DIAMETER | 0.224 INCHES NOMINAL |
| MATT | MATERIAL | COPPER ALLOY FILTERING MEDIUM |
| ADMT | TAPERED HOLE MAJOR DIAMETER | 0.156 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | ELEMENT ID IS ONLY 0.110 IN. DEEP AND NOT A THRU HOLE |
| ADNK | FLOW DIRECTION | INSIDE OUT |
| ADNP | DROP PRESSURE | 3.0 POUNDS PER SQUARE INCH |
| MEDA | MEDIA FOR WHICH DESIGNED | GAS |