National Stock Number (NSN) Output Data
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 127392 | 60764 | A | 5 | 9 | E | AX | ||
| P50-2-100-RV3 | 55524 | A | 3 | 2 | E | AX |
CAGE Information
| Code | Company |
|---|---|
| 55524 | FLOW EZY FILTERS INC |
| 60764 | WIGGINS LIFT CO. INC. |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CBBL | FEATURES PROVIDED | BY-PASS VALVE |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| ADNL | FILTERING SURFACE AREA | 2.4 SQUARE FEET |
| AGCW | WIRE DIAMETER | 0.005 INCHES NOMINAL |
| CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| ADNQ | DIFFERENTIAL PRESSURE | NOT RATED |
| THSD | THREAD SERIES DESIGNATOR | NPT |
| AZTL | BODY OVERALL LENGTH | 9.125 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 4.188 INCHES NOMINAL |
| CRXW | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE |
| MATT | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM |
| AZKQ | TEMP RATING | NOT RATED |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| APGF | DESIGN TYPE | LIMITED |
| FEAT | SPECIAL FEATURES | NYLON END;HEX FACILITY;75 GPM;FILTRATION RATING 149.0 MICRONS,ABSOLUTE |
| ADNP | DROP PRESSURE | 0.2 POUNDS PER SQUARE INCH |
| ADNH | FILTRATION RATING IN MICRONS | NOT RATED |
| CQJX | NOMINAL THREAD SIZE | 2.000 INCHES |
| STYL | STYLE DESIGNATOR | SUMP TYPE |
| AKSX | MESH SIZE | 100.0 |