Part Number
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
CAGE Information
| Code | Company |
|---|---|
| 6N299 | AGCO CORP PARTS OPN |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABPX | MATERIAL THICKNESS | 0.125 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.125 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 0.684 INCHES MINIMUM AND 0.685 INCHES MAXIMUM |
| MATT | MATERIAL | NICKEL ALLOY UNS N10001 OVERALL |
| ABMD | RECESS DIAMETER | 0.562 INCHES NOMINAL |
| CSTM | RECESS ANGLE | 45.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | OD AT BASE HAS CHAMFER 0.016 IN. BY 45.0 DEG |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-N-894 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | RECESS |
| AAUB | HOLE DIAMETER | 0.500 INCHES NOMINAL |