Part Number
Part Number:
NSN:
NIIN:
Item Name:
MOTOR , CONTROL
Definition:
A MOTOR WHICH IS DESIGNED TO BE OPERATED FROM TWO INDEPENDENT VOLTAGE SOURCES, IN SUCH A WAY THAT VARIATIONS IN ONE VOLTAGE SOURCE WILL DETERMINE THE DIRECTION AND SPEED OF THE MOTOR. IN THE ALTERNATING CURRENT TYPE THE VOLTAGES ARE USUALLY APPLIED TO A SPLIT-PHASE STATOR, WHEREAS IN THE DIRECT CURRENT TYPE, ONE VOLTAGE IS APPLIED TO THE STATOR AND THE OTHER TO THE ARMATURE. LOW INERTIA AND RAPID REVERSIBILITY ARE INHERENT CHARACTERISTICS OF THIS TYPE OF MOTOR. SEE ALSO SERVOMOTOR, AUTOMATIC PILOT.
CAGE Information
| Code | Company |
|---|---|
| 82577 | RAYTHEON COMPANY DBA RAYTHEON |
Federal Supply Class
Title
MOTORS, ELECTRICAL
Inclusions:
Exclusions:
EXCLUDES STARTING MOTORS FOR ENGINES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ACDC | CURRENT TYPE | AC INPUT |
| AXGY | MOUNTING METHOD | FLANGE |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| BFML | CONTROL FIELD WINDING TYPE | SINGLE WINDING W/CENTER TAP |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| BKPH | TORQUE RATING AND TYPE | 2.7 INCH-OUNCES STALLED |
| AXFH | SPLINE LENGTH | 0.210 INCHES NOMINAL SECOND END |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.210 INCHES SECOND END |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS | 495.0 |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 57.5 AC AND 115.0 AC |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.120 INCHES FIRST END |
| AAJU | OVERALL LENGTH | 2.350 INCHES |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | 1.250 INCHES |
| BFMF | COOLING METHOD | AMBIENT AIR |
| AAJV | OVERALL WIDTH | 1.750 INCHES |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| AXFH | SPLINE LENGTH | 0.120 INCHES NOMINAL FIRST END |
| FREQ | FREQUENCY IN HERTZ | 400.0 INPUT |
| AAJT | OVERALL HEIGHT | 1.750 INCHES |
| FAAZ | PHASE | SINGLE INPUT |
| AAUH | SPLINE MINOR DIAMETER | 0.108 INCHES NOMINAL IDENTICAL ENDS |
| ABSA | SPLINE QUANTITY | 13 IDENTICAL ENDS |
| CWDY | TEMP RATING | -65.0 OPERATING DEG CELSIUS AND 105.0 OPERATING DEG CELSIUS |
| CWFX | ROTOR SPEED RATING IN RPM | 9500.0 SINGLE NO LOAD |
| ABWV | SHAFT DIAMETER | 0.176 INCHES MINIMUM IDENTICAL ENDS AND 0.177 INCHES MAXIMUM IDENTICAL ENDS |
| ANPZ | INCLOSURE FEATURE | OPEN PROTECTED |
| CWHZ | SHAFT END CHARACTERISTIC | A14 SINGLE STYLE IDENTICAL ENDS |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | 50000.0 FEET |