Part Number
Part Number:
NSN:
NIIN:
Item Name:
MICROCIRCUIT , LINEAR
Definition:
A MICROCIRCUIT WHOSE OUTPUT IS A FUNCTION OF THE INPUT; THAT IS, THE OUTPUT VARIES IN A PREDETERMINED AND ESSENTIALLY PREDICTABLE MANNER FROM THE INPUT SIGNAL.
CAGE Information
| Code | Company |
|---|---|
| 19133 | MCDONNELL DOUGLAS CORP MCDONNELL DOU |
Federal Supply Class
Title
MICROCIRCUITS, ELECTRONIC
Inclusions:
INCLUDES INTEGRATED CIRCUIT DEVICES; INTEGRATED CIRCUIT MODULES, INTEGRATED ELECTRONIC DEVICES: HYBRID, MAGNETIC, MOLECULAR, OPTO-ELECTRONIC, AND THIN FILM.
Exclusions:
EXCLUDES SINGLE CIRCUIT ELEMENTS SUCH AS CAPACITORS; RESISTORS; DIODES AND TRANSISTORS; PRINTED CIRCUIT BOARDS AND CIRCUIT CARD ASSEMBLIES; AND FILTERS AND NETWORKS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACE GOLD |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| PRMT | PRECIOUS MATERIAL | GOLD |
| CQSJ | INCLOSURE MATERIAL | GLASS AND METAL |
| CSSL | DESIGN FUNCTION AND QUANTITY | 1 AMPLIFIER, CURRENT |
| CWSG | TERMINAL SURFACE TREATMENT | GOLD |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND HYBRID AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | T0-99 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| CZEQ | TIME RATING PER CHACTERISTIC | 12.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 600.0 MILLIWATTS |
| ADAU | BODY HEIGHT | 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 PIN |
| CQZP | INPUT CIRCUIT PATTERN | 3 INPUT |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 22.0 VOLTS MAXIMUM POWER SOURCE |
| ADAR | BODY OUTSIDE DIAMETER | 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| CQSZ | INCLOSURE CONFIGURATION | CAN |
| TEST | TEST DATA DOCUMENT | 19133-4350041 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |