Part Number
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code | Company |
|---|---|
| 98410 | MOLEX-ETC INC SUB OF MOLEX INC |
Federal Supply Class
Title
LUGS, TERMINALS, AND TERMINAL ST
Inclusions:
INCLUDES BINDING POSTS; BATTERY CLIPS; STUD TERMINALS; TEST CLIPS.
Exclusions:
EXCLUDES CAPS, ELECTRICAL; CLIPS, ELECTRICAL; AND CONTACTS, ELECTRICAL.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPB | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1100.0 |
| AAPB | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1100.0 |
| ABGS | BASE THICKNESS | 0.250 INCHES |
| CRZR | FEEDTHRU TERMINAL QUANTITY | 5 SINGLE COMBINATION |
| ABCS | TERMINAL ROW QUANTITY | 1 |
| ABGQ | BOARD OVERALL HEIGHT | 0.718 INCHES |
| ABGP | BOARD OVERALL WIDTH | 0.562 INCHES |
| AMPS | CURRENT RATING IN AMPS | 15.0 |
| CQCW | FEEDTHRU CONNECTION END TYPE | 857 FOURTH COMBINATION BOTH ENDS |
| CQCW | FEEDTHRU CONNECTION END TYPE | 433 15TH MATERIAL RESPONSE BOTH ENDS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE MDG MIL SPEC SINGLE MATERIAL RESPONSE BOARD |
| CWLG | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW |
| ABCT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.375 INCHES |
| MATT | MATERIAL | COPPER ALLOY TERMINALS |
| ABGR | BOARD HEIGHT EXCLUDING TERMINALS | 0.406 INCHES |
| ABDU | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.250 INCHES |
| CWLN | TERMINAL DESIGN | VERTICAL FEEDTHRU |
| ABCX | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP |
| SFTT | SURFACE TREATMENT | NICKEL TERMINALS |
| AAMA | MOUNTING HOLE DIAMETER | 0.156 INCHES |
| ABDW | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.281 INCHES |
| ABGN | BOARD OVERALL LENGTH | 2.531 INCHES |
| ABDX | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.141 INCHES |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| MATT | MATERIAL | PLASTIC DIALLYL PHTHALATE BOARD AND SILICA BOARD |
| AAQL | BODY STYLE | BARRIER TYPE |