Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 77445 | UNITED TECHNOLOGIES CORPORATION DBA |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFZ | SECOND END DIAMETER | 0.3125 INCHES MINIMUM AND 0.3130 INCHES MAXIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AAHP | SECOND END STYLE | PLAIN |
| ZZZV | FSC APPLICATION DATA | CONTROL ASSY,COMPRESSOR BLEED,2995001734005 671702 |
| ABHP | OVERALL LENGTH | 4.140 INCHES MINIMUM AND 4.160 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | FIRST END IS INTERNALLY SPLINED,16 TEETH,DIA PITCH 32/64,PRESSURE ANGLE 30 DEG,SECOND END HAS HOLE BORED 0.119 IN. MAX,0.160 IN. MAX DP |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| CSPY | LARGEST STEP DIAMETER | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 0.7400 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 5 |