Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT ASSEMBLY , FLEXIBLE
Definition:
AN ITEM CONSISTING OF A CASING WITH FITTINGS AND ATTACHMENTS ON EACH END AND A SPIRALLY WOUND WIRE CORE WITH FORMED END(S) AND/OR CRIMPED ON END FITTINGS. IT IS DESIGNED TO TRANSMIT ROTARY MOTION AROUND BENDS FROM A MOTOR OR OTHER POWER SOURCE TO DRIVE VARIOUS TYPES OF EQUIPMENT, SUCH AS TACHOMETERS, SPEEDOMETERS, REMOTE CONTROLS, INSTRUMENTS, AND THE LIKE, WHICH ARE LOCATED AT AN ANGLE AND/OR DISTANCE FROM THE POWER SOURCE. SEE ALSO CONTROL ASSEMBLY, PUSH-PULL.
CAGE Information
Code | Company |
---|---|
57733 | STEWART-WARNER CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
APTD | END TYPE | ROUND KEYED FIRST END |
CFQW | CROSS SECTION SIZE AND LOCATION | 0.150 INCHES FILTER HOUSING LEFT SIDE ANY ACCEPTABLE FIRST END AND 0.153 INCHES ONE WASHER SWAGED TO SLEEVE ANY ACCEPTABLE FIRST END |
BJPS | CASING MATERIAL | RUBBER AND STEEL |
CFRN | CASING SURFACE TREATMENT | ANY ACCEPTABLE |
AECT | THREAD DEPTH | 0.375 INCHES NOMINAL SECOND END |
AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
ABUJ | THREAD SIZE (NON-CORE) | ERR-070 |
APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
AEDN | TIP LENGTH | 1.018 INCHES MINIMUM FIRST END AND 1.022 INCHES MAXIMUM FIRST END |
AJYP | SCREW THREAD SERIES DESIGNATOR | UNF SECOND END |
ABHP | OVERALL LENGTH | 108.578 INCHES MINIMUM AND 108.891 INCHES MAXIMUM |
AJXJ | CORE MATERIAL | STEEL |
ASDB | WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL FIRST END |
AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END |
CFRZ | CORE OVERALL LENGTH | 108.547 INCHES MINIMUM AND 108.859 INCHES MAXIMUM |
CFRP | CASING LENGTH BETWEEN FERRULES | 107.437 INCHES MINIMUM AND 107.562 INCHES MAXIMUM |
FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION |
CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
ASDB | WIDTH ACROSS FLATS | 0.750 INCHES NOMINAL SECOND END |
AAJD | THREAD CLASS | 2B BOTH ENDS |
CFRX | OVERALL END SIZE | FIRST END: 1.188 IN. W; SECOND END: 0.875 IN. W |
CFRQ | CASING OUTSIDE DIAMETER | 0.300 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
AECT | THREAD DEPTH | 0.327 INCHES NOMINAL FIRST END |
AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
AEDN | TIP LENGTH | 0.950 INCHES MINIMUM SECOND END AND 1.010 INCHES MAXIMUM SECOND END |
CFQW | CROSS SECTION SIZE AND LOCATION | 0.101 INCHES BOTTOM HALF NOT APPLICABLE SECOND END AND 0.104 INCHES SIDE WAIST NOT APPLICABLE SECOND END |
ZZZV | FSC APPLICATION DATA | SPEEDOMETER,TANK,90-MM GUN |
CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
CFSM | STRENGTH RATING CHARACTERISTICS (NON-CORE) | 15.0 POUNDS TORSION STRENGTH EITHER DIRECTION |
CFSL | CORE REMOVABILITY | REMOVABLE |
CGDN | MINIMUM OPERATING RADIUS | 5.000 INCHES |
APTD | END TYPE | SQUARE MALE SECOND END |
CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
AKMF | CORE SURFACE TREATMENT | ZINC COATED |
AKMH | CORE DIAMETER | 0.150 INCHES NOMINAL |