Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 19139 | EASTMAN KODAK COMPANY DBA KODAK |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 0.2500 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | EASTMAN KODAK CO VERSAMAT PROCESSOR MODEL 11C,1411-M,1411A-M |
| AMFZ | SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | EK-156 MFR REF SINGLE MATERIAL RESPONSE |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.375 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | FLATTED |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| FEAT | SPECIAL FEATURES | TWO ADDITIONAL HOLES LOCATED 1.305 IN. AND 3.501 IN. FROM SECOND END,BOTH ENDS CHAMFERED 0.031 IN. BY 45 DEG |
| AMCX | FIRST END FLAT LENGTH | 0.312 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.0810 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 5.375 INCHES NOMINAL |
| AMCW | FIRST END FLAT DEPTH | 0.0310 INCHES NOMINAL |