Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 96169 | ELECTRIC BOAT CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | U2ND STEP 0.100IN.DIA,0.120IN.LG; 3RD STEP KEYED 0.374IN.DIA,1.188IN.LG; 4TH STEP 0.499IN.DIA,0.620IN.LG; 5TH STEP 0.644 IN.DIA,0.570IN.LG; 6TH STEP 0.750-16-1NF-2B THD,9.000 IN.LG,7TH STEP 0.640IN.DIA,0.560IN.LG; 8TH STEP PINNED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AMFZ | SECOND END DIAMETER | 1.2500 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.8100 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 9 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| AAHX | SECOND END GROOVE DIAMETER | 0.8100 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | SSBN TRIDENT CLASS,ANCHOR CHAIN INDICATOR ASSEMBLY |
| AMDL | FIRST END DIAMETER | 0.1600 INCHES NOMINAL |
| AAHP | SECOND END STYLE | CROSS DRILLED AND CIRCULAR GROOVED |
| MATT | MATERIAL | STEEL COMP 304 |
| ABHP | OVERALL LENGTH | 14.1500 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.1560 INCHES NOMINAL |
| AMHD | SECOND END HOLE DEPTH | 0.8100 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.2500 INCHES NOMINAL |
| AAHW | SECOND END GROOVE WIDTH | 1.2500 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.2500 INCHES NOMINAL |