Part Number
Part Number:
NSN:
NIIN:
Item Name:
STUD , PLAIN
Definition:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. THE MAXIMUM DIAMETER OF THE UNTHREADED PORTION MUST NOT BE GREATER THAN THE NOMINAL THREAD DIAMETER PLUS 0.020 INCHES (0.508 MM). THE UNTHREADED PORTION MUST BE WITHOUT LOCKING OR WRENCHING PROVISIONS. IT MAY BE THREAD RELIEVED. SEE ALSO ROD, THREADED END AND ROD, CONTINUOUS THREAD.
CAGE Information
| Code | Company |
|---|---|
| 80070 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASA | THREAD LENGTH | 0.696 INCHES MAXIMUM STUD THREAD |
| AASA | THREAD LENGTH | 0.696 INCHES MAXIMUM STUD THREAD |
| AAJE | THREAD PITCH DIAMETERS | +0.2842/+0.2855 INCHES STUD THREAD |
| AAJD | THREAD CLASS | 3A NUT THREAD |
| CMLP | THREAD QUANTITY PER INCH | 18 STUD THREAD |
| MATT | MATERIAL | STEEL COMP E4340 |
| AASA | THREAD LENGTH | 0.500 INCHES MAXIMUM NUT THREAD |
| ADDV | COTTER PIN HOLE DIAMETER | 0.075 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.110 INCHES MINIMUM FIRST HOLE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE |
| ABHP | OVERALL LENGTH | 1.329 INCHES MINIMUM AND 1.359 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES STUD THREAD |
| THSD | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
| CQFM | HARDNESS RATING | 27.0 ROCKWELL C NOMINAL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |