National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 6AXSA6FJ6RJ9-30 | 81300 | A | 3 | 2 | E | ZZ | ||
| 078178-30.00 | 59276 | F | 5 | 9 | 6 | ZZ | ||
| 636676 | 60764 | A | 5 | 2 | 6 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 59276 | BRUDI INC |
| 81300 | PARKER-HANNIFIN CORPORATION DBA INDU |
| 60764 | WIGGINS LIFT CO. INC. |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| AAJD | THREAD CLASS | 2B 2ND END |
| ADLH | SECOND END FITTING SPEC/STD DATA | SAE J516, TABLE 4A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 30.000 INCHES NOMINAL OVERALL |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| THSD | THREAD SERIES DESIGNATOR | UNJF 2ND END |
| ABKV | OUTSIDE DIAMETER | 0.620 INCHES NOMINAL |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, CHLOROPRENE |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQBD | BURST TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| ADLG | FIRST END FITTING SPEC/STD DATA | SAE J516, TABLE 4A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AAJD | THREAD CLASS | 2B 1ST END |
| ADLF | HOSE OR TUBING SPEC/STD DATA | SAE J517, 100R1, TYPE AT, SIZE 6-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |