Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , METALLIC
Definition:
A LENGTH OF METALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, METALLIC. EXCLUDES CONDUIT, ELECTRICAL; CONDUIT ASSEMBLY, ELECTRICAL; CASING, FLEXIBLE CONTROL; AND CASING, FLEXIBLE SHAFT ASSEMBLY.
CAGE Information
| Code | Company |
|---|---|
| SCY13 | E.C.A ETABLISSEMENT CENTRAL DES APPR |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ADJM | INNER CONVEYING TUBE MATERIAL | STEEL, CORROSION RESISTING |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| ADJS | EXTERIOR COLOR | NATURAL |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | HEAT RESISTANT |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| ADLF | HOSE OR TUBING SPEC/STD DATA | FED WW-H-1053,CLASS S,TYPE 1,COMPOSITION A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 2ND END |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | INCLUDED |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| AAJD | THREAD CLASS | 3B 1ST END |
| CQRB | SEAT ANGLE | 45.0 DEGREES 1ST END |
| ABKV | OUTSIDE DIAMETER | 0.875 INCHES NOMINAL |
| CQRB | SEAT ANGLE | 45.0 DEGREES 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER SPIRAL INTERLOCKED CORROSION RESISTANT STEEL |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZED |
| AAJD | THREAD CLASS | 3B 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 59.000 INCHES MINIMUM OVERALL AND 61.000 INCHES MAXIMUM OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | INCLUDED |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UNJ 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNJ 2ND END |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM |
| CMLP | THREAD QUANTITY PER INCH | 12 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| ADJL | INNER CONVEYING TUBE STYLE | INTERLOCKED UNPACKED |