National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 9552-16-0180 | 00624 | A | 3 | 2 | 1 | AX |
CAGE Information
| Code | Company |
|---|---|
| 00624 | EATON CORPORATION DBA AEROSPACE DIV |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQBD | BURST TEST PRESSURE | 3200.0 POUNDS PER SQUARE INCH |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AJED | RAISED FACE HEIGHT | 0.009 INCHES NOMINAL 2ND END |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGM | MAXIMUM OPERATING PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| ABKV | OUTSIDE DIAMETER | 1.234 INCHES NOMINAL |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD ERR-100 |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL MIL-H-8794-16 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRXX | MEASURING METHOD AND LENGTH | 18.000 INCHES NOMINAL WORKING |
| AECS | BOLT HOLE QUANTITY | 3 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZED |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| ABKU | FLANGE THICKNESS | 0.325 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| ABKG | BOLT CIRCLE DIAMETER | 2.312 INCHES NOMINAL 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.400 INCHES |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| AAJD | THREAD CLASS | 3B 1ST END |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CRDW | HYDROSTATIC TEST PRESSURE | 1600.0 POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CTCJ | FLANGE STYLE | TRIANGULAR 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.343 INCHES NOMINAL 2ND END |
| AGFF | FLANGE WIDTH | 2.312 INCHES NOMINAL 2ND END |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZED |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AFQN | FLANGE LENGTH | 2.312 INCHES NOMINAL 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD ERR-100 |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE ERR-100 |
| AARX | INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| AJEE | RAISED FACE DIAMETER | 1.781 INCHES NOMINAL 2ND END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AHNC | CONNECTION STYLE | RAISED 2ND END |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY |
| ADLG | FIRST END FITTING SPEC/STD DATA | MIL MS24587-16 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |