Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 02280 | AMERICAN HOIST AND DERRICK CO |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| ABKV | OUTSIDE DIAMETER | 0.937 INCHES MINIMUM AND 0.999 INCHES MAXIMUM |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 OR COMPLETE FITTING ZINC, QQ-Z-325, TYPE 2, CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END |
| ADLG | FIRST END FITTING SPEC/STD DATA | ARMY ENGINEER RESEARCH AND DEVELOPMENT LABORATORIES 13215E7634-1 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AAJD | THREAD CLASS | 1A 2ND END |
| CQBD | BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CRXX | MEASURING METHOD AND LENGTH | 38.000 INCHES NOMINAL OVERALL |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQGM | MAXIMUM OPERATING PRESSURE | 3500.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, BUNA-N |
| AHNC | CONNECTION STYLE | FLARED 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE ERR-100 |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| AARX | INSIDE DIAMETER | 0.485 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRDW | HYDROSTATIC TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 OR COMPLETE FITTING ZINC, QQ-Z-325, TYPE 2, CLASS 2 |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| AAJD | THREAD CLASS | 2B 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| ADLH | SECOND END FITTING SPEC/STD DATA | ARMY ENGINEER RESEARCH AND DEVELOPMENT LABORATORIES 13215E7647-1 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |