Part Number
Definition:
AN ITEM OF ANY PERIPHERAL SHAPE USUALLY HAVING ONE FLAT OR SPHERICAL SURFACE AND A CENTRALLY LOCATED HOLE. IT IS DESIGNED FOR APPLICATIONS INVOLVING MOVING (KINETIC) LOADS. EXCEPT FOR ITEMS FABRICATED FROM BEARING QUALITY SYNTHETIC (PLASTIC) OR COMPOSED OF MULTILAYER MATERIAL, ONE BEARING SURFACE MUST EITHER HAVE A SPECIFIC SURFACE FINISH DESIGNATION OF 32 MICROINCH (0.8 MICROMETRE) OR LESS, ARITHMETICAL AVERAGE (AA) (ARITHMETIC MEAN DEVIATION) OR ONE OF THE FOLLOWING CONDITIONS: BE LAPPED OR GROUND; HAVE VISIBLE OR DETECTABLE MEANS OF LUBRICATION; GROOVES, INDENTATIONS; OR SELF-LUBRICATION. THE THICKNESS MUST NOT EXCEED 25 PERCENT OF THE OUTSIDE DIAMETER OF THE SHORTEST DISTANCE BETWEEN PERIPHERAL FLATS (WHEN THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE). EXCLUDES STRAIGHT, TUBULAR (WITHOUT FLANGE) ITEMS HAVING A BEARING SURFACE(S) PARALLEL TO THE AXIS OF THE BORE ONLY. SEE ALSO WASHER, FLAT AND SPACER, SLEEVE.
CAGE Information
| Code | Company |
|---|---|
| 00994 | COLUMBUS JACK CORPORATION |
Federal Supply Class
Title
BEARINGS, PLAIN, UNMOUNTED
Inclusions:
INCLUDES SLEEVE BEARINGS; SPLIT BEARINGS; WASHER TYPE BEARINGS; JEWEL BEARINGS.
Exclusions:
EXCLUDES ANTIFRICTION BEARINGS (FSC 3110); MOUNTED BEARINGS (FSC 3130).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STYL | STYLE DESIGNATOR | ROUND |
| STYL | STYLE DESIGNATOR | ROUND |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| MATT | MATERIAL | COPPER ALLOY OVERALL |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| ABKV | OUTSIDE DIAMETER | 2.5000 INCHES NOMINAL |
| ADUM | OVERALL THICKNESS | 0.1250 INCHES NOMINAL |
| BZLX | CORNER SHAPE | SQUARE ALL CORNERS |
| ADZG | LUBRICATION MATERIAL | LUBRICANT, MANUFACTURERS STANDARD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-5687,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABMZ | DIAMETER | 2.0000 INCHES NOMINAL |