Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 0AHU0 | KALMAR AC INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| BDSR | SECOND END SPLINE QUANTITY | 15 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.9690 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 1.750 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.8330 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| AMDL | FIRST END DIAMETER | 1.9690 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.9690 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 1.750 INCHES NOMINAL |
| AAHP | SECOND END STYLE | SPLINED (STRAIGHT) |
| ATPC | STEP QUANTITY | 3 |
| AMFZ | SECOND END DIAMETER | 1.9690 INCHES NOMINAL |
| BDSQ | FIRST END SPLINE QUANTITY | 23 |
| ABHP | OVERALL LENGTH | 4.875 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.8330 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 4.875 INCHES NOMINAL |