Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , STRAIGHT
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code |
Company |
| 11083 |
CATERPILLAR INC. DBA CATERPILLAR DIV |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AMFZ |
SECOND END DIAMETER |
0.4930 INCHES MINIMUM AND 0.4935 INCHES MAXIMUM |
| AMFZ |
SECOND END DIAMETER |
0.4930 INCHES MINIMUM AND 0.4935 INCHES MAXIMUM |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AMDE |
FIRST END EXTERNAL KEYWAY LENGTH |
0.500 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
UNTHREADED CROSS DRILLED |
| AMDL |
FIRST END DIAMETER |
0.4930 INCHES MINIMUM AND 0.4935 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 1018 |
| AMGT |
SECOND END DISTANCE FROM HOLE CENTER TO END |
1.057 INCHES NOMINAL |
| AMCZ |
FIRST END KEYWAY WIDTH |
0.9280 INCHES MINIMUM AND 0.9430 INCHES MAXIMUM |
| AMGS |
SECOND END HOLE DIAMETER |
0.1360 INCHES NOMINAL |
| AMDH |
FIRST END DISTANCE FROM KEYWAY CENTER TO END |
0.375 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
STARTING ENGINE ASSY,POWER UNIT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| AAGZ |
FIRST END STYLE |
WOODRUFF KEYWAY |
| ABHP |
OVERALL LENGTH |
4.875 INCHES NOMINAL |
Similar Parts