Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 9.120 INCHES MINIMUM AND 9.140 INCHES MAXIMUM |
| BDSQ | FIRST END SPLINE QUANTITY | 47 |
| AMFZ | SECOND END DIAMETER | 1.4970 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | 2 HOLES ONE IN EACH END THRU SPLIINES, DIA OF BOTH HOLES IS 0.218 TO 0.224, CENTER TO CENTER BETWEEN HOLES IS 6.930 TO 6.940, HOLE LOCATED 1.700 FROM 2ND END AND 1.410 FROM 1ST END |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.4970 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT-DRIVE ARM CREW ENTRY DOOR |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.3982 INCHES MINIMUM AND 1.4063 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 1.4970 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.4970 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| BDSR | SECOND END SPLINE QUANTITY | 47 |
| AMDM | FIRST END SPLINE LENGTH | 1.400 INCHES MINIMUM AND 1.420 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659 ASSN STD SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.3982 INCHES MINIMUM AND 1.4063 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 2.400 INCHES MINIMUM AND 2.420 INCHES MAXIMUM |
| AAHN | END SIMILARITY | IDENTICAL |