Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| ATPC | STEP QUANTITY | 7 |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.140 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.3500 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.125 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.1105 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | MATERIAL-300M(TRICENT) PER STM 05-501,HEAT TREATED 280-300 KSI PER STP 54-006 |
| AMDL | FIRST END DIAMETER | 0.3500 INCHES NOMINAL |
| AMHD | SECOND END HOLE DEPTH | 0.350 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | C-5 AIRCRAFT |
| ABHP | OVERALL LENGTH | 4.550 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 250.0 MICROINCHES |