Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHP | SECOND END STYLE | CIRCULAR GROOVED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| ATPC | STEP QUANTITY | 7 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ST-05-602 MFR REF SINGLE MATERIAL RESPONSE |
| ABHP | OVERALL LENGTH | 2.482 INCHES NOMINAL |
| AAHX | SECOND END GROOVE DIAMETER | 0.2900 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.312 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.0550 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 1.3120 INCHES NOMINAL |
| AAHW | SECOND END GROOVE WIDTH | 0.0850 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.5000 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | CARGO RAMP LOCK C5B ACFT |