Part Number
Part Number:
NSN:
NIIN:
Item Name:
BELL CRANK
Definition:
AN ITEM IN THE FORM OF TWO ARMS AT AN ANGLE, HAVING ITS FULCRUM AT THE APEX OF THE ANGLE, AND USED TO PROVIDE A MEANS OF CHANGING THE DIRECTION OR VARYING THE INTENSITY OF A PUSHING OR PULLING FORCE. SEE ALSO ARM (AS MODIFIED); AND LEVER (AS MODIFIED).
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
AIRFRAME STRUCTURAL COMPONENTS
Inclusions:
INCLUDES FLIGHT CONTROL SURFACES; INTERNAL AND EXTERNAL AUXILIARY FUEL TANKS; EXHAUST SYSTEMS; PYLONS, TRIM TABS; AIRCRAFT.
Exclusions:
EXCLUDES FITTED COVERS; HELICOPTER ROTOR BRAKE SYSTEM COMPONENTS; AIRCRAFT LOOSE EQUIPMENT AND ALTERNATE MISSION CONFIGURATION EQUIPMENT STORED ON BOARD THE AIRCRAFT.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CZLM | CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL | 1.180 INCHES NOMINAL 1ST END |
| CZLM | CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL | 1.180 INCHES NOMINAL 1ST END |
| ADGE | BORE LENGTH | 0.900 INCHES MINIMUM AND 0.910 INCHES MAXIMUM |
| CZLN | END HOLE/BALL DIAMETER | 0.322 INCHES MINIMUM 1ST END AND 0.329 INCHES MAXIMUM 1ST END |
| CZLN | END HOLE/BALL DIAMETER | 0.453 INCHES MINIMUM 2ND END AND 0.455 INCHES MAXIMUM 2ND END |
| MATT | MATERIAL | ALUMINUM ALLOY |
| ABXV | BORE DIAMETER | 0.828 INCHES MINIMUM AND 0.831 INCHES MAXIMUM |
| CZLM | CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL | 2.940 INCHES NOMINAL 2ND END |
| STYL | STYLE DESIGNATOR | RAISED FACED HOLES, OFFSET ARM |