Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 11083 | CATERPILLAR INC. DBA CATERPILLAR DIV |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFW | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 0.562 INCHES NOMINAL |
| AMFW | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 0.562 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.7500 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 0.7500 INCHES NOMINAL |
| AAHP | SECOND END STYLE | WOODRUFF KEYWAY |
| FEAT | SPECIAL FEATURES | SIX FLAT PLACES 0.500 IN. WIDE,0.125 IN. DEEP SCATTERED OUT ON THE SHAFT |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| AMFR | SECOND END KEYWAY WIDTH | 0.1250 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AAHH | FIRST END GROOVE DIAMETER | 0.5000 INCHES NOMINAL |
| AAHG | FIRST END GROOVE WIDTH | 0.3125 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.719 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 59.844 INCHES NOMINAL |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 0.500 INCHES NOMINAL |