Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 1WL60 | LOCKHEED MARTIN SERVICES INC. |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.970 INCHES NOMINAL |
| AAHP | SECOND END STYLE | EXTERNAL THREADED |
| CSPY | LARGEST STEP DIAMETER | 5.795 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 9.000 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | END NO. 12 THREADED 4 3/4 UN-3A,WITH 8 KEYWAYS EVENLY SPACED .250 IN. W.,.970 IN. L;FILL AND DRAIN WITH COATS MIL-W-38713 COMP. |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE |
| AMDL | FIRST END DIAMETER | 5.7950 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 4 |
| AGAV | END ITEM IDENTIFICATION | C-5 AIRCRAFT |
| MATT | MATERIAL | STEEL COMP 4340 |