Part Number
Part Number:
NSN:
NIIN:
Item Name:
RESOLVER , ELECTRICAL
Definition:
AN ITEM CONSISTING OF A ROTOR AND A STATOR INDUCTIVELY COUPLED. IT USUALLY HAS TWO ROTOR WINDINGS DISPLACED FROM EACH OTHER BY 90 DEGREES AND TWO STATOR WINDINGS SIMILARLY DISPLACED. THE OUTPUT VOLTAGE(S) IS A TRIGONOMETRIC FUNCTION OF THE INPUT VOLTAGE(S) AND THE ANGULAR DISPLACEMENT OF THE ROTOR WITH RESPECT TO THE STATOR. SEE ALSO SYNCHRO (AS MODIFIED) AND GONIOMETER, ELECTRICAL. EXCLUDES TRANSOLVER, ELECTRICAL AND POTENTIOMETER SINE/COSINE ELECTRICAL RESOLVERS.
CAGE Information
| Code | Company |
|---|---|
| 07421 | INTERSTATE ELECTRONICS CORPORATION |
Federal Supply Class
Title
SYNCHROS AND RESOLVERS
Inclusions:
Exclusions:
EXCLUDES SYNCHRO SYSTEMS; SERVO MECHANISMS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AJSL | BODY SIZE | 11 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 220.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 400.00 NOMINAL |
| CQTM | TERMINAL LOCATION | REAR |
| ABKK | FLANGE DIAMETER | 1.0610 INCHES MINIMUM |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 300.00 NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| ABPA | UNDERCUT DIAMETER | 0.9995 INCHES MINIMUM |
| AAVL | PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.11 INCH-OUNCES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.3900 INCHES MINIMUM SINGLE SHAFT AND 0.4200 INCHES MAXIMUM SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.4045 INCHES MINIMUM AND 0.4075 INCHES MAXIMUM |
| CSJY | TRANSFORMATION RATIO | 0.980 ROTOR TO STATOR NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 250.00 NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1873 INCHES NOMINAL SINGLE SHAFT |
| CRHN | SHAFT SLOT WIDTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| AJWR | SHOULDER LENGTH | 0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| AAQL | BODY STYLE | STANDARD ROUND C |
| ABHP | OVERALL LENGTH | 2.4200 INCHES MAXIMUM |
| CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | 440.00 NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0470 INCHES MINIMUM AND 0.0530 INCHES MAXIMUM |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.33 INCH-OUNCES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.0000 INCHES MAXIMUM |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0/+5.0 |
| ABKU | FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AAVH | SHOULDER DIAMETER | 0.9700 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AAFZ | BODY MATERIAL | STEEL, STAINLESS |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 2000.00 NOMINAL |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 MAXIMUM |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 1.000 ROTOR TO COMPENSATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 SCREW |
| AJVF | PHASE SHIFT ANGLE IN DEG | 7.000 INPUT TO OUTPUT NOMINAL |
| AJWQ | PILOT LENGTH | 0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| AJSW | ZRO RESISTANCE IN OHMS | 605.00 NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |