Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFZ | SECOND END DIAMETER | 0.7500 INCHES NOMINAL |
| AMFP | SECOND END FLAT LENGTH | 0.750 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 0.500 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.7500 INCHES NOMINAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT |
| ABHP | OVERALL LENGTH | 2.900 INCHES NOMINAL |
| AMFN | SECOND END FLAT DEPTH | 0.1000 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | SHAFT IS USED FOR THE HANDLE: P/N 512-7067252-12; P/N 34-26-7812 IS THE RAW STOCK TO MAKE SHAFT, IT'S ATTACHED TO NSN 3040-01-159-6145 AS AN OBSOLETE NUMBER |
| MATT | MATERIAL | STEEL COMP 304 |
| CSPY | LARGEST STEP DIAMETER | 0.750 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 2 |
| AAHP | SECOND END STYLE | FLATTED AND INTERNALLY THREADED |
| AGAV | END ITEM IDENTIFICATION | LOS ANGELES CLASS SSN (688) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 CL 304 COND B FED SPEC SINGLE MATERIAL RESPONSE |