Part Number
Part Number:
NSN:
NIIN:
Item Name:
BOLT , CLOSE TOLERANCE
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code |
Company |
| S7549 |
AEROSPACE INDUSTRIAL DEVELOPMENT COR |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.3130 INCHES |
| AASB |
FASTENER LENGTH |
1.611 INCHES MINIMUM AND 1.641 INCHES MAXIMUM |
| AAZH |
HEAD MINOR DIAMETER |
0.605 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AGAV |
END ITEM IDENTIFICATION |
PACER DAWN |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
NAS 672 NATIONAL SPEC SINGLE TREATMENT RESPONSE THREADS |
| AASK |
HEAD STYLE |
SPLINE DRIVE SHEAR HEAD |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASU |
HEAD HEIGHT |
0.187 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM THREADS |
| AAUR |
GRIP DIAMETER |
0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS-6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ANEE |
GRIP LENGTH |
1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.438 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
DRY FILM LUBE ON BEARING SURFACE HEAD AND GRIP AREA ONLY:HOLE DRILLED IN SHANK 0.076 IN. DIA X 0.311/0.312 IN. NOM DEEP |
| MATT |
MATERIAL |
STEEL COMP H11 OVERALL |
Similar Parts