National Stock Number (NSN) Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 735966 | 39215 | F | 5 | 9 | 5 | ZZ | ||
| PK377 | 00198 | A | 5 | 9 | 2 | CT | ||
| 70026-12 | 95097 | H | 5 | 9 | 5 | SE | ||
| 9419275 | 7X677 | A | 5 | 1 | 5 | KZ | ||
| 1276-18-481 | A0199 | A | 5 | 2 | 6 | ZG | ||
| C4524-380-5 | 60532 | A | 5 | 1 | 1 | PA | ||
| 7064-4 | 0W357 | A | 5 | 1 | 5 | HD | ||
| 6300782-12 | 53711 | A | 5 | 1 | 5 | ZZ | ||
| 81309827N | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 5593619 | 34623 | A | 5 | 9 | 5 | ZZ | ||
| 1276-18-481 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| FF-W-92 | 81348 | M | 4 | 1 | 4 | KZ | ||
| 84001-1 | 29201 | A | 5 | 1 | 5 | CT | ||
| V11-001-028 | 97403 | A | C | 1 | 4 | ZZ | AF | |
| MS15795-12 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 120393 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| V11-1-028 | 97403 | A | 5 | 1 | 4 | CT | ||
| 23-00600-031 | 64678 | A | 5 | 1 | 6 | ZZ | ||
| 9419275 | 11862 | H | 5 | 9 | 5 | KZ | ||
| 410060113 | S5652 | A | 8 | 2 | 1 | ZR | ||
| 12A5C3 | 33968 | A | C | 1 | 6 | KZ | AB | |
| 405130014 | S5686 | A | 5 | 2 | 1 | ZW | ||
| MS27183-12 | 96906 | M | 2 | 2 | 4 | KZ | ||
| 81309827 | 82796 | A | C | 1 | 6 | ZZ | AC | |
| 19084 | 96046 | A | 5 | 1 | 5 | CT | ||
| LS1785-516 | 98897 | A | C | 1 | 5 | KE | AC | |
| 1804HX1 | 45152 | A | 5 | 1 | 5 | ZZ | ||
| 526-1115 | 44940 | A | 5 | 1 | 5 | KZ | ||
| NAS1070-516 | 80205 | A | 5 | 9 | 4 | SB | ||
| 5310000814219 | SCY13 | A | 5 | 9 | 9 | YP | ||
| 7064-4 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 0707316 | S3002 | A | 5 | 2 | 3 | YB |
CAGE Information
| Code | Company |
|---|---|
| 00198 | PRATT AND WHITNEY CANADA INC WHITNEY |
| 39215 | MCCORD CORP |
| 95097 | LITTLE GIANT CRANE AND SHOVEL INC |
| 7X677 | GENERAL MOTORS LLC DBA GENERAL MOTOR |
| A0199 | OTO MELARA SPA |
| 60532 | TRANE U.S. INC. DBA TRANE DIV TRANE |
| 0W357 | PDI GROUND SUPPORT SYSTEMS INC. |
| 53711 | NAVAL SEA SYSTEMS COMMAND |
| D9182 | BOSCH REXROTH GMBH LOHMANN STOLTERFO |
| 34623 | AM GENERAL LLC |
| 81348 | FEDERAL SPECIFICATIONS PROMULGATED B |
| 29201 | JOHN DEER CONSUMER PRODUCTS INC |
| 97403 | CECOM LR CENTER |
| 64678 | DAIMLER TRUCKS NORTH AMERICA LLC |
| 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR |
| S5652 | RAFAEL |
| 33968 | CLARK EQUIPMENT COMPANY DBA DOOSAN I |
| S5686 | ISRAEL MILITARY INDUSTRIES LTD. IMI |
| 96906 | MILITARY STANDARDS PROMULGATED BY MI |
| 82796 | COLTEC INDUSTRIES INC. DBA FAIRBANKS |
| 96046 | CRANE PUMPS & SYSTEMS INC. |
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
| 45152 | OSHKOSH CORPORATION |
| 44940 | CUMMINS POWER GENERATION INC. DBA CU |
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
| SCY13 | E.C.A ETABLISSEMENT CENTRAL DES APPR |
| S3002 | MOWAG AG |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABNM | THICKNESS | 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| ABNM | THICKNESS | 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | A TYPE AND 1 GRADE AND A CLASS |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| MATT | MATERIAL | STEEL OVERALL |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| AAUB | HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ADAV | OVERALL DIAMETER | 0.681 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |