National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| S8164-202 |
70210 |
A |
3 |
2 |
2 |
SB |
|
|
CAGE Information
| Code |
Company |
| 70210 |
HONEYWELL INTERNATIONAL INC. DBA HON |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CSYM |
SURFACE FINISH |
100.0 MICROINCHES OUTER |
| CSYM |
SURFACE FINISH |
100.0 MICROINCHES OUTER |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| ADAV |
OVERALL DIAMETER |
1.150 INCHES MINIMUM AND 1.160 INCHES MAXIMUM |
| ABNM |
THICKNESS |
0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| CSYM |
SURFACE FINISH |
100.0 MICROINCHES INNER |
| HEAT |
HEAT TREATMENT |
AS FABRICATED |
| ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
| CQFM |
HARDNESS RATING |
28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES BOTTOM |
| MATT |
MATERIAL |
STEEL COMP 4130 OVERALL OR STEEL OVERALL |
| AAUB |
HOLE DIAMETER |
0.687 INCHES MINIMUM AND 0.692 INCHES MAXIMUM |
Similar Parts