National Stock Number (NSN) Output Data
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 0532-15 | 94120 | A | 3 | 2 | 1 | HD | ||
| 0532-15NM | 03950 | A | 5 | 1 | 5 | HD |
CAGE Information
| Code | Company |
|---|---|
| 03950 | NAVAL INVENTORY CONTROL POINT MECHAN |
| 94120 | U S DIVERS CO INC DBA FOREIGN PARENT |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ACTD | NUT DIAMETER | 0.562 INCHES NOMINAL |
| ACTD | NUT DIAMETER | 0.562 INCHES NOMINAL |
| ABQU | DRIVE POINT DEPTH | 0.094 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| ABPH | SMALL END DIAMETER | 0.344 INCHES NOMINAL |
| ADBM | DRIVE POINT QUANTITY | 2 |
| CQFM | HARDNESS RATING | NOT RATED |
| ADBG | NUT THICKNESS | 0.250 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | TIN OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRSQ | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT |
| AZKQ | TEMP RATING | NOT RATED |
| ADBH | DRIVE POINT WIDTH | 0.062 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | GMAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATION AND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTED FIELD,OUTER PERIPHERY HAS V GROOVE OF 60 DEGRE BY 0.01 IN. DEEP |
| ACTA | NUT STYLE | ROUND |
| BZRR | THREAD SERIES | UNC |
| AAJD | THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| MATT | MATERIAL | COPPER OVERALL |
| ADBJ | UNDERCUT THICKNESS | 0.156 INCHES NOMINAL |