National Stock Number (NSN) Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| AN960PD1216 | 72599 | R | 5 | 9 | X | XX | ||
| 407 593 | 77294 | A | 5 | 2 | 5 | 9Z | ||
| AN960PD1216 | 99193 | A | 5 | 1 | X | XX | ||
| 2409-3265410PC13 | 80064 | A | 5 | 1 | X | XX | ||
| 2409-3265410REVCPC13 | 80064 | A | 5 | 1 | X | XX | ||
| AN960PD1216 | 88044 | M | 2 | 2 | E | XX | ||
| 23825-23826REVCPC13 | 82340 | A | 5 | 1 | X | XX |
CAGE Information
| Code | Company |
|---|---|
| 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL A |
| 77294 | PIPER AIRCRAFT INC. |
| 99193 | HONEYWELL INTERNATIONAL INC. DBA HON |
| 80064 | NAVAL SHIP SYSTEMS COMMAND |
| 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF |
| 82340 | EDO CORPORATION DIV DEFENSE SYSTEMS |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | ALUMINUM ALLOY OVERALL |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OVERALL AND MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| ADAV | OVERALL DIAMETER | 1.307 INCHES MINIMUM AND 1.332 INCHES MAXIMUM |
| ABNM | THICKNESS | 0.083 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.755 INCHES MINIMUM AND 0.775 INCHES MAXIMUM |