National Stock Number (NSN) Output Data
Definition:
AN ITEM INTERNALLY THREADED FROM ONE END, AND COMPLETELY INCLOSED ON THE OPPOSITE END. THE OUTER PERIPHERY PARALLEL TO THE THREADED AXIS MAY BE SQUARE, CYLINDRICAL, HEXAGONAL, OCTAGONAL, OR DODECAGONAL AND TAPER TO A CONE OR DOME SHAPE ON THE CLOSED END. FOR LIKE ITEMS WHICH ARE STAMPED OR FORMED FROM SHEET STOCK, SEE NUT (1), STAMPED. FOR SIMILAR ITEMS WHICH ARE FLAT ON TOP AND BOTTOM SEE NUT (1), SLEEVE OR POST, ELECTRICAL-MECHANICAL EQUIPMENT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 7340055 | 19207 | A | 3 | 2 | X | XX | ||
| 5310006559593 | SCY13 | A | 5 | 9 | 9 | YP |
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
| SCY13 | E.C.A ETABLISSEMENT CENTRAL DES APPR |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNF |
| AGGP | DRILLED HOLE DIAMETER | 0.078 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| ASDB | WIDTH ACROSS FLATS | 1.110 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR ASTM A108 ASSN STD 2ND MATERIAL RESPONSE OVERALL OR ASTM A108 ASSN STD 3RD MATERIAL RESPONSE OVERALL |
| ACTA | NUT STYLE | CAP |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| MATT | MATERIAL | STEEL COMP 1212 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1022 OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 1 CL 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR QQ-Z-325 TY 2 CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| CSXL | BEARING SURFACE FINISH | 50.0 MICROINCHES |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| ADEA | NUT HEIGHT | 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | ZINC OVERALL AND CADMIUM OVERALL OR CHROMATE OVERALL |
| ALET | HOLE TYPE AND QUANTITY | 3 DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 20 |