National Stock Number (NSN) Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| NAS 620C-4L | 70318 | A | C | 1 | A | BF | AA | |
| 1176-00745 | K0662 | A | 5 | 2 | 4 | ZK | ||
| 4197600-21 | 05869 | A | 5 | 2 | 5 | KZ | ||
| 004-002894-053 | 26916 | A | 5 | 2 | 5 | 9Z | ||
| 29-0005 | 39741 | H | 5 | 9 | 5 | KE | ||
| 40530006316 | S0522 | A | 5 | 2 | 3 | YB | ||
| 9336C2008-5 | 87557 | F | C | 1 | A | BF | AA | |
| NAS620-CAL | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 137301-37 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| S8157N33-020 | 99193 | A | C | 1 | 6 | ZZ | AC | |
| 24-00162-044 | K0268 | A | 5 | 2 | 2 | ZK | ||
| 4M36-01057 | 76301 | A | C | 1 | A | KE | AC | |
| TH-WG0409 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 947620-4041 | 06481 | A | 5 | 2 | 5 | ZZ | ||
| 947620-4041 | 13973 | R | 5 | 9 | 5 | KE | ||
| 21172-00745 | K0662 | A | 5 | 2 | 4 | ZK | ||
| B68030 | K0967 | A | 5 | 2 | 2 | ZK | ||
| SWSS0707-02RV | 55972 | A | E | 8 | 1 | KZ | ||
| 5310007239676 | SCY13 | A | 5 | 9 | 9 | YP | ||
| 4197600-21 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| S8154-206C020 | 99193 | A | C | 1 | 5 | TU | AB | |
| 5953180 | S0522 | A | 5 | 2 | 3 | ZG | ||
| NAS620C4L | 80205 | A | 3 | 2 | E | KE | ||
| SWSS0707-02RV | 19315 | A | E | 8 | 1 | KZ | ||
| 2504638-5 | 07187 | A | C | 1 | 5 | KE | AB |
CAGE Information
| Code | Company |
|---|---|
| 05869 | RAYTHEON COMPANY DBA RAYTHEON |
| 70318 | ALLMETAL SCREW PRODUCTS CORP DBA ALL |
| K0662 | SELEX GALILEO LTD |
| 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
| 39741 | MERILLAT ROAD SUPPLY CO |
| S0522 | TADIRAN LTD |
| 87557 | LOCKHEED CORP LOCKHEED ELECTRONICS C |
| D9182 | BOSCH REXROTH GMBH LOHMANN STOLTERFO |
| 99193 | HONEYWELL INTERNATIONAL INC. DBA HON |
| K0268 | RAYTHEON SYSTEMS LTD |
| 76301 | BOEING COMPANY THE DBA BOEING |
| 06481 | NORTHROP GRUMMAN GUIDANCE AND ELECTR |
| 13973 | LITTON SYSTEMS INC. DIV NAVIGATION S |
| K0967 | MBDA UK LTD |
| 55972 | HONEYWELL INTL INC DEFENSE AVIONICS |
| SCY13 | E.C.A ETABLISSEMENT CENTRAL DES APPR |
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
| 19315 | HONEYWELL INTL INC DEFENSE AVIONICS |
| 07187 | HONEYWELL INTERNATIONAL INC DBA HONE |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS620 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| ABNM | THICKNESS | 0.016 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 0.204 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| AAUB | HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |