National Stock Number (NSN) Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 34515 | 13841 | A | 5 | 1 | 4 | SE | ||
| 106261 | 24617 | A | 5 | 9 | 4 | KZ | ||
| 10344 | 64829 | A | 5 | 9 | 4 | KZ | ||
| MS15795-11 | 96906 | M | 5 | 9 | 4 | KZ | ||
| 120393 | 29215 | A | 5 | 1 | 5 | ZZ | ||
| 526-130 | 44940 | A | 5 | 9 | 5 | KZ | ||
| MS15795-211 | 96906 | M | 5 | 9 | 4 | KZ | ||
| 85816 | 08683 | H | 5 | 9 | 4 | KZ | ||
| 5118-103-15 | 79466 | A | 5 | 1 | 4 | KZ | ||
| SK-6003-10 | 0EAK3 | A | 5 | 1 | 5 | KZ | ||
| 5310PL0656734 | 9009H | A | 5 | 9 | 9 | WP | ||
| D17000A | 04773 | F | 5 | 9 | 4 | KZ | ||
| FF-W-92 | 81348 | M | 4 | 1 | 4 | KZ | ||
| 34705S | 23040 | R | 5 | 9 | 4 | KZ | ||
| 853689-00 | 32345 | A | 5 | 9 | 2 | XB | ||
| 106261 | 72582 | A | 5 | 1 | 4 | KZ | ||
| PC106261 | C7432 | H | 5 | 9 | 3 | ZG | ||
| 945-4P | 78385 | A | 5 | 9 | X | XX | ||
| 106261 | 18876 | A | 5 | 9 | 4 | KZ | ||
| 299-010 | 72741 | A | 5 | 1 | E | KZ | ||
| 120110-3 | 24821 | A | C | 1 | 6 | ZZ | AC | |
| AN945-4P | 88044 | M | 5 | 9 | 4 | SB | ||
| MS27183-11 | 96906 | M | 2 | 2 | 4 | KZ | ||
| 5118-103-15 | 80372 | A | 5 | 1 | 4 | KZ | ||
| 526-1513 | 44940 | A | 5 | 1 | 5 | CT | ||
| 106261 | 12204 | A | 5 | 9 | 4 | KZ | ||
| 106261 | 17733 | A | 5 | 9 | 4 | KZ | ||
| 2AF292 | 45152 | A | C | 1 | 6 | ZZ | AA | |
| 734463-2 | 80045 | A | 5 | 9 | X | XX | ||
| 120393 | 16004 | A | 5 | 9 | 5 | BD | ||
| 21&64IDSCP | 70318 | A | C | 1 | 9 | TU | ||
| 5310008093078 | SCY13 | A | 5 | 9 | 9 | YP | ||
| 91324 | 08645 | A | 5 | 9 | 4 | KZ | ||
| 0912464 | 92392 | H | 5 | 9 | 5 | KZ | ||
| 120196 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 912464 | 92392 | H | 5 | 9 | 4 | KZ |
CAGE Information
| Code | Company |
|---|---|
| 04773 | GTE COMMUNICATION SYSTEMS CORP |
| 13841 | TIFFIN PARTS L.L.C. DIV SUBSIDIARY O |
| 24617 | GENERAL MOTORS CORP |
| 64829 | ARVINMERITOR INC |
| 96906 | MILITARY STANDARDS PROMULGATED BY MI |
| 29215 | JENNY PRODUCTS INC. |
| 44940 | CUMMINS POWER GENERATION INC. DBA CU |
| 08683 | BROCKWAY MOTOR TRUCKS DIV OF MACK TR |
| 79466 | AESYS TECHNOLOGIES L.L.C. DBA JACKSO |
| 0EAK3 | GSE MANAGEMENT CO |
| 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
| 81348 | FEDERAL SPECIFICATIONS PROMULGATED B |
| 23040 | FORD MOTOR CO FORD PARTS AND SERVICE |
| 32345 | DEFENSE REDUCTION AGENCY MS 6201 |
| 72582 | TOGNUM AMERICA INC |
| C7432 | POWER COMPONENTS DEUTSCHLAND GMBH |
| 78385 | MEGGITT TROY INC. |
| 18876 | U S ARMY AVIATION AND MISSILE COMMAN |
| 72741 | DORMAN PRODUCTS INC |
| 24821 | ROSEMOUNT ANALYTICAL INC. DBA ROSEMO |
| 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF |
| 80372 | MARINE CORPS |
| 12204 | DAIMLER CHRYSLER |
| 17733 | DIEBOLD INCORPORATED DIV GSA SECURIT |
| 45152 | OSHKOSH CORPORATION |
| 80045 | L-3 COMMUNICATIONS CINCINNATI ELECTR |
| 16004 | DAVEY COMPRESSOR CO DIV OF KECO INDU |
| 70318 | ALLMETAL SCREW PRODUCTS CORP DBA ALL |
| SCY13 | E.C.A ETABLISSEMENT CENTRAL DES APPR |
| 08645 | BRIGGS AND STRATTON CORP |
| 92392 | ALLIS-CHALMERS CORP |
| D9182 | BOSCH REXROTH GMBH LOHMANN STOLTERFO |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABNM | THICKNESS | 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| ADAV | OVERALL DIAMETER | 0.727 INCHES MINIMUM AND 0.749 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.307 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY THE FINISH |
| MATT | MATERIAL | STEEL OVERALL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 GRADE AND A TYPE AND A CLASS |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |