National Stock Number (NSN) Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 38180 | 96046 | A | 5 | 1 | 5 | CT | ||
| 5310-300 | 61796 | A | C | 1 | 6 | ZZ | AA | |
| 4197515-022 | 05869 | A | 5 | 2 | 5 | ZX | ||
| MS15795-115 | 96906 | M | 5 | 9 | 4 | KZ | ||
| 120389 | 80195 | A | C | 1 | 6 | ZZ | AF | |
| S018003 | 03677 | F | 5 | 9 | 1 | PA | ||
| 5310PL0656722 | 9009H | A | 5 | 9 | 9 | WP | ||
| 4B5271 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| FF-W-92 | 81348 | M | 4 | 1 | 4 | KZ | ||
| 492346 | 7X677 | A | 5 | 1 | 2 | KZ | ||
| 15015 | K8693 | H | 5 | 2 | 2 | ZK | ||
| MS15795-15 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 110380A | 45152 | A | 5 | 1 | A | ZZ | ||
| A22506-7 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| MS27183-15 | 96906 | M | 2 | 2 | 4 | KZ | ||
| CSA46410 | 82254 | A | 5 | 9 | 5 | CD | ||
| 106263 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 0309346 | H0001 | A | 5 | 2 | 1 | ZN | ||
| 331967 | 11862 | H | 5 | 9 | 2 | KZ | ||
| 492346 | 11862 | H | 5 | 9 | 2 | KZ | ||
| 12387279-15 | 19207 | A | 5 | 1 | A | ZZ | ||
| 13207E7100FN466 | 97403 | A | C | 1 | 1 | CT | ||
| AN945-6 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 5310008094061 | SCY13 | A | 5 | 9 | 9 | YP | ||
| 309346 | H0001 | A | 5 | 2 | 1 | ZN | ||
| 7HR818 | 45152 | A | C | 1 | 6 | ZZ | AA | |
| 0717580 | S3002 | A | 5 | 2 | 3 | YB |
CAGE Information
| Code | Company |
|---|---|
| 03677 | ANTHONY YORK CO |
| 96046 | CRANE PUMPS & SYSTEMS INC. |
| 61796 | CEMEN TECH INC. |
| 05869 | RAYTHEON COMPANY DBA RAYTHEON |
| 96906 | MILITARY STANDARDS PROMULGATED BY MI |
| 80195 | E D ETNYRE & CO DBA EDETNYRE |
| 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
| D9182 | BOSCH REXROTH GMBH LOHMANN STOLTERFO |
| 81348 | FEDERAL SPECIFICATIONS PROMULGATED B |
| 7X677 | GENERAL MOTORS LLC DBA GENERAL MOTOR |
| K8693 | DIABLO SYSTEMS LTD |
| 45152 | OSHKOSH CORPORATION |
| 82254 | CURTIS DYNA-FOG LTD. |
| H0001 | DAF TRUCKS N.V. |
| 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR |
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
| 97403 | CECOM LR CENTER |
| SCY13 | E.C.A ETABLISSEMENT CENTRAL DES APPR |
| S3002 | MOWAG AG |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| ABNM | THICKNESS | 0.064 INCHES MINIMUM AND 0.104 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 GRADE AND A TYPE AND A CLASS |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| ADAV | OVERALL DIAMETER | 0.993 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |