National Stock Number (NSN) Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| STR0NGH0LDWASHER-8 | 74323 | F | 5 | 9 | X | XX | ||
| MS15795-8 | 80205 | A | 5 | 9 | E | ZZ | ||
| 5310PL0721194 | 9009H | A | 5 | 9 | 9 | WP | ||
| MS 27183-8 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 4197515-007 | 05869 | A | 5 | 2 | 5 | ZX | ||
| 5310008098546 | SCY13 | A | 5 | 9 | 9 | YP | ||
| 53006 | 96046 | A | 5 | 1 | 5 | CT | ||
| MS15795-8 | 96906 | M | 5 | 9 | 6 | KZ | ||
| 4B4274 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| D301079 FIND NO 43 | 3X894 | A | C | 1 | 5 | ZZ | AC | |
| 12Z3035-36 | 94135 | M | 5 | 1 | X | XX | ||
| 4197500-032 | 05869 | A | 5 | 1 | X | XX | ||
| MS27183-08 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 35361 | 05463 | F | 5 | 9 | X | XX | ||
| MS15975-208 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| D301080 FIND NO 39 | 3X894 | A | C | 1 | 5 | ZZ | AC | |
| MS15795-108 | 96906 | M | 5 | 9 | X | XX | ||
| XX002-0529 | H2229 | H | 5 | 9 | 2 | ZN | ||
| X25-49 | 55469 | A | 5 | 9 | X | XX | ||
| 446160 | 21450 | M | 5 | 1 | 1 | BF | ||
| 1018985-008 | 0HBH2 | A | C | 1 | 5 | ZZ | 9X | |
| TIP00021 | 97403 | A | 5 | 1 | 3 | CT | ||
| A20489 | U4574 | A | 5 | 2 | 4 | ZK | ||
| MS27183-8 | 96906 | M | 2 | 2 | E | XX | ||
| A10643 | U4574 | A | 5 | 2 | 4 | ZK | ||
| D301087 FIND NO 43 | 3X894 | A | C | 1 | 5 | ZZ | AC | |
| B4525-307-23 | 60532 | A | 5 | 1 | 1 | PA | ||
| MS15795-208 | 96906 | M | 5 | 9 | X | XX | ||
| 1018985-008 | 05037 | A | 5 | 9 | 5 | KE | ||
| 4197500-032 | 82577 | A | 5 | 1 | X | XX | ||
| 88-368-30-130 | 79092 | F | 5 | 9 | 5 | PA | ||
| MS15795-108 | 80205 | A | 5 | 9 | E | ZZ | ||
| MS15795-208 | 80205 | A | 5 | 9 | E | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 05037 | ANACOMP INC. |
| 74323 | STRONGHOLD SCREW PRODUCTS |
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
| 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
| D9182 | BOSCH REXROTH GMBH LOHMANN STOLTERFO |
| 05869 | RAYTHEON COMPANY DBA RAYTHEON |
| SCY13 | E.C.A ETABLISSEMENT CENTRAL DES APPR |
| 96046 | CRANE PUMPS & SYSTEMS INC. |
| 96906 | MILITARY STANDARDS PROMULGATED BY MI |
| 3X894 | CONTROL FLOW INC. DBA WESTECH HEAVY |
| 94135 | NAVAL ORDNANCE STANDARDS |
| 05463 | WHEELABRATOR-FRYE INC BALCRANK PRODU |
| H2229 | RDM TECHNOLOGY B.V. |
| 55469 | ESSEX PRECISION CONTROLS INC |
| 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE- |
| 0HBH2 | LEXEL IMAGING SYSTEMS INC. |
| 97403 | CECOM LR CENTER |
| U4574 | MANROY ENGINEERING LTD |
| 60532 | TRANE U.S. INC. DBA TRANE DIV TRANE |
| 82577 | RAYTHEON COMPANY DBA RAYTHEON |
| 79092 | REED INDUSTRIES INC VICTOR PRODUCTS |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.214 INCHES MINIMUM AND 0.227 INCHES MAXIMUM |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | A TYPE AND 1 GRADE AND A CLASS |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| ABNM | THICKNESS | 0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ADAV | OVERALL DIAMETER | 0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |