National Stock Number (NSN) Output Data
Definition:
A WASHER, ROUND IN SHAPE, HAVING A CENTRALLY LOCATED HOLE. ONE BEARING SURFACE IS FLAT, THE OTHER SURFACE IS IN THE FORM OF A RAISED SHOULDER (BOSS) HAVING A FLAT BEARING SURFACE. EITHER OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILAR SHAPED RECESS. THE THICKNESS OF THE SHOULDER (BOSS) MUST NOT EXCEED 25 PERCENT OF THE SHOULDER (BOSS) DIAMETER. FOR ITEMS HAVING A SHOULDER (BOSS) OF GREATER THICKNESS, USE BEARING, SLEEVE; BUSHING, SLEEVE; OR SPACER, SLEEVE. EXCLUDES INSULATOR, WASHER AND THRUST TYPE WASHERS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 2118057-001 | 12436 | A | 3 | 9 | 2 | SB |
CAGE Information
| Code | Company |
|---|---|
| 12436 | BAE SYSTEMS NATIONAL SECURITY SOLUTI |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-637,HALF HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAVH | SHOULDER DIAMETER | 0.500 INCHES NOMINAL |
| MATT | MATERIAL | COPPER ALLOY OVERALL |
| ABMD | RECESS DIAMETER | 1.030 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 1.180 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | SHOULDERED AND RECESSED |
| ABMG | SHOULDER HEIGHT | 0.060 INCHES NOMINAL |
| ABMH | RECESS DEPTH | 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABPX | MATERIAL THICKNESS | 0.120 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AAUB | HOLE DIAMETER | 0.180 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |