National Stock Number (NSN) Output Data
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 70351-08022-102 | 78286 | A | 3 | 2 | 1 | CT |
CAGE Information
| Code | Company |
|---|---|
| 78286 | SIKORSKY AIRCRAFT CORPORATION |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | 1.875 INCHES |
| ADBG | NUT THICKNESS | 0.440 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ADBM | DRIVE POINT QUANTITY | 2 |
| ABPH | SMALL END DIAMETER | 2.380 INCHES NOMINAL |
| ADBJ | UNDERCUT THICKNESS | 0.040 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION J |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| ADBH | DRIVE POINT WIDTH | 0.500 INCHES NOMINAL |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| BZRR | THREAD SERIES | UNJ |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SS8416 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| AGGP | DRILLED HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| ABQU | DRIVE POINT DEPTH | 0.405 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PHOSPHATE OVERALL |
| ACTA | NUT STYLE | ROUND |
| ALET | HOLE TYPE AND QUANTITY | 2 DRILLED |
| ACTD | NUT DIAMETER | 2.480 INCHES NOMINAL |
| CRSQ | COUNTERSINK ANGLE | 85.0 DEGREES MINIMUM BOTH ENDS AND 95.0 DEGREES MAXIMUM BOTH ENDS |