National Stock Number (NSN) Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
---|---|---|---|---|---|---|---|---|
7326304 | 53711 | A | D | 9 | C | ZZ | ||
7326304-1 | 53711 | A | 5 | 2 | C | ZZ | ||
7326304-1 | 31442 | A | 3 | 2 | C | ZZ |
CAGE Information
Code | Company |
---|---|
31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
ABNM | THICKNESS | 0.125 INCHES NOMINAL |
MATT | MATERIAL | STEEL COMP 304 OVERALL |
AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
AGAV | END ITEM IDENTIFICATION | USED ON ASDS |
ABMX | CENTER HOLE SHAPE STYLE | ROUND |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A240, TYPE 304, COND A, FINISH 2B ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
ADAV | OVERALL DIAMETER | 1.680 INCHES NOMINAL |
FEAT | SPECIAL FEATURES | DRAWING CALLS THIS: SUPPORT WASHER |
ABMW | PERIPHERAL SHAPE STYLE | ROUND |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35, TYPE VI OR VII (S/S BY SAE-ASTM-QQ-P-35) FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
AAUB | HOLE DIAMETER | 0.404 INCHES MINIMUM AND 0.411 INCHES MAXIMUM |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |