National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
NUT , SELF-LOCKING , SPLINE
Definition:
A NUT HAVING AN EXTERNALLY SPLINED SLEEVE, WHICH HOLDS IT IN POSITION WHEN FORCED INTO A HOLE OF SLIGHTLY SMALLER DIAMETER. AN INTEGRAL FEATURE IS INCORPORATED FOR LOCKING.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| C7592A3M2 | 81755 | A | 7 | 2 | 1 | ZZ | ||
| FGD6010L10-M-2 | 0HDW7 | A | 3 | 2 | 5 | ZZ | ||
| FT5195-10-12-2P | 58794 | A | 3 | 2 | 5 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 0HDW7 | HUCK INTERNATIONAL INC. DBA ALCOA FA |
| 81755 | LOCKHEED MARTIN CORPORATION DBA LOCK |
| 58794 | FASTENER TECHNOLOGY CORP. |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| SFTT | SURFACE TREATMENT | CADMIUM BRACKET |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SHELL AND QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| MATT | MATERIAL | STEEL COMP 1050 BRACKET |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE 11, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BRACKET |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-777 FED SPEC 1ST MATERIAL RESPONSE NUT OR AMS 5085 ASSN STD 2ND MATERIAL RESPONSE NUT OR AMS 6351 ASSN STD 2ND MATERIAL RESPONSE NUT |
| SFTT | SURFACE TREATMENT | PASSIVATE SHELL AND CADMIUM SHELL |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| AAVL | PILOT DIAMETER | 0.264 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| ACVN | NUT LENGTH | 0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.390 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AZKQ | TEMP RATING | ANY ACCEPTABLE |
| ACTA | NUT STYLE | SPLINE (FLOATING) |
| MATT | MATERIAL | STEEL COMP 1050 NUT OR STEEL COMP 1075 NUT OR STEEL COMP 4130 NUT |
| FEAT | SPECIAL FEATURES | HARDNESS RATING APPLIES TO THE BRACKET ONLY, THE NUT HAS A 160 KSI MIN TENSILE STRENGTH |
| AAJD | THREAD CLASS | 3B |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| CQFM | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5085 ASSN STD SINGLE MATERIAL RESPONSE BRACKET |
| AAVM | PILOT LENGTH | 0.440 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 304 SHELL OR STEEL COMP 305 SHELL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23195 MIL SPEC 1ST MATERIAL RESPONSE SHELL OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE SHELL OR AMS 5514 ASSN STD 2ND MATERIAL RESPONSE SHELL |
| AGAV | END ITEM IDENTIFICATION | F-16 AIRCRAFT |
| SFTT | SURFACE TREATMENT | CADMIUM NUT |
| BZRR | THREAD SERIES | UNJF |
| CBBL | FEATURES PROVIDED | FLOATING NUT |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ADEA | NUT HEIGHT | 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NUT PLATE |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |