National Stock Number (NSN) Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 50657 | 96046 | A | 5 | 2 | 5 | CT | ||
| 2L8166 | 11083 | A | 5 | 2 | 2 | CT | ||
| 55901 | 30076 | A | 5 | 9 | X | XX | ||
| 863995 | 12603 | R | 5 | 9 | X | XX | ||
| 583K960 | 83299 | A | 5 | 2 | X | XX | ||
| 2L8166 | 25496 | A | 5 | 9 | 5 | CT | ||
| 1914842 | 16764 | R | 5 | 9 | X | XX | ||
| 7348958 | 19207 | A | 3 | 2 | X | XX | ||
| 851895 | 12603 | R | 5 | 9 | X | XX | ||
| 1914842 | 72582 | A | 5 | 9 | 5 | KZ | ||
| A41917 | 10988 | A | 5 | 2 | 2 | KZ | ||
| 1914842 | 24617 | A | 5 | 9 | X | XX | ||
| 320639 | 83299 | A | C | 1 | 9 | KZ | ||
| 55901 | 04627 | A | 5 | 2 | 5 | KZ | ||
| 10A1914842 | 23382 | A | 3 | 2 | X | XX | ||
| 833602 | 24617 | A | 5 | 2 | X | XX | ||
| 4042706 | 89926 | A | C | 1 | 9 | KZ | ||
| 137781H | 29930 | F | 5 | 9 | 5 | KZ | ||
| KC7952 | 56442 | F | 5 | 9 | 5 | KZ | ||
| 833602 | 16764 | R | 5 | 9 | X | XX | ||
| 71155 | 95097 | H | 5 | 9 | 5 | SE | ||
| 833602 | 1LW55 | A | 5 | 2 | 5 | ZZ | ||
| 1914842 | 1LW55 | A | 3 | 2 | 5 | ZZ | ||
| 1914842 | 7X677 | A | C | 1 | 5 | ZZ | 9X | |
| 863995 | 77237 | A | 3 | 2 | 5 | ZZ | ||
| 137781H | 31007 | C | 5 | 9 | 5 | KZ | ||
| 2L8166 | U3363 | H | 5 | 2 | 2 | ZK | ||
| 851895 | 77237 | A | 5 | 2 | 5 | ZZ | ||
| 41534 | 45152 | A | 5 | 2 | X | XX | ||
| 1914842 | 61928 | A | 3 | 2 | 5 | KZ | ||
| 33655 | 13841 | A | 5 | 2 | 5 | CD |
CAGE Information
| Code | Company |
|---|---|
| 04627 | NACCO MATERIALS HANDLING GROUP INC |
| 96046 | CRANE PUMPS & SYSTEMS INC. |
| 11083 | CATERPILLAR INC. DBA CATERPILLAR DIV |
| 30076 | NACCO MATERIALS HANDLING GROUP INC D |
| 12603 | CLARK EQUIPMENT CO |
| 83299 | NACCO MATERIALS HANDLING GROUP INC D |
| 25496 | HOLT BROS |
| 16764 | GENERAL MOTORS CORP DELCO REMY DIV |
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
| 72582 | TOGNUM AMERICA INC |
| 10988 | CNH AMERICA LLC |
| 24617 | GENERAL MOTORS CORP |
| 23382 | FWD SEAGRAVE HOLDINGS LP DIV SEAGRAV |
| 89926 | NEW HOLLAND CONSTRUCTION |
| 29930 | INTERNATIONAL HARVESTER CO AGRICULTU |
| 56442 | DIAMOND REO TRUCK CO |
| 95097 | LITTLE GIANT CRANE AND SHOVEL INC |
| 1LW55 | REMY INC. |
| 7X677 | GENERAL MOTORS LLC DBA GENERAL MOTOR |
| 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
| 31007 | NAVISTAR INTL CORP |
| U3363 | CATERPILLAR TRACTOR CO LTD |
| 45152 | OSHKOSH CORPORATION |
| 61928 | GENERAL MOTORS CORP AC-DELCO DIV GOV |
| 13841 | TIFFIN PARTS L.L.C. DIV SUBSIDIARY O |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.561 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.561 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| ABNM | THICKNESS | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| MATT | MATERIAL | STEEL COMP 1010 OVERALL |
| ADAV | OVERALL DIAMETER | 0.974 INCHES MINIMUM AND 0.994 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | ZINC OVERALL AND CADMIUM OVERALL |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |