National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
WASHER , LOCK
Definition:
A WASHER WHICH IS USUALLY ROUND WITH A CENTRALLY LOCATED HOLE. ITS EDGES AND TWO BEARING SURFACES ARE SO DESIGNED THAT APPLIED PRESSURE BRINGS INTO PLAY THE SPRING TENSION AND/OR FRICTIONAL LOCKING PRINCIPLE WHICH MATERIALLY RESISTS ANY TENDENCY TOWARD TURNING. IT MAY BE MADE OF ONE OR TWO PIECES
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| MS35338-122 | 80205 | A | 3 | 2 | E | ZZ | ||
| 2151312-1 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 004-003005-003 | 26916 | A | 5 | 2 | E | KZ | ||
| 99D5DBTPC503B | 10613 | A | C | 1 | 6 | ZZ | AC | |
| MS35338-122 | 96906 | M | 5 | 9 | X | XX | ||
| 1737560-30 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 2477283PC18 | 25685 | A | C | 1 | 6 | ZZ | AC |
CAGE Information
| Code | Company |
|---|---|
| 10613 | PENTAIR PUMP GROUP INC. DBA FAIRBANK |
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
| D9182 | BOSCH REXROTH GMBH LOHMANN STOLTERFO |
| 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
| 96906 | MILITARY STANDARDS PROMULGATED BY MI |
| 25685 | NAVAL SHIP ENGINEERING CENTER PHILAD |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABKV | OUTSIDE DIAMETER | 0.683 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 0.683 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| STYL | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND |
| AGAV | END ITEM IDENTIFICATION | MRAP RG-33 |
| MATT | MATERIAL | NICKEL ALLOY A OVERALL |
| ABPX | MATERIAL THICKNESS | 0.094 INCHES MINIMUM AND 0.104 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAUB | HOLE DIAMETER | 0.382 INCHES MINIMUM AND 0.393 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 155000 POUNDS PER SQUARE INCH |