National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| 9902069-1 |
24446 |
A |
5 |
2 |
X |
XX |
|
|
| 9902069-1 |
81893 |
H |
3 |
9 |
X |
XX |
|
|
CAGE Information
| Code |
Company |
| 24446 |
GENERAL ELECTRIC CO |
| 81893 |
GENERAL ELECTRIC CO LYNN RIVER WORKS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
L1-08027 MFR 81893 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| ABMW |
PERIPHERAL SHAPE STYLE |
DEE |
| MATT |
MATERIAL |
STEEL OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
B8A3,GENERAL ELECTRIC CO.,LYNN RIVER WORKS MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| ABNM |
THICKNESS |
0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
| ADAV |
OVERALL DIAMETER |
1.307 INCHES MINIMUM AND 1.332 INCHES MAXIMUM |
| ABGL |
WIDTH |
1.073 INCHES MINIMUM AND 1.126 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAUB |
HOLE DIAMETER |
0.755 INCHES MINIMUM AND 0.775 INCHES MAXIMUM |
Similar Parts